This combo pairs the CellBlok with the SwitchBlade Transducer Arm. To complete the install all you need is a YakAttack fish finder mount compatible with your make and model of fish finder and a battery.
No more drilling holes in your kayak or routing wires! Simply loosen the two track mount knobs and the CellBlok allows you to quickly and easily attach or remove your depthfinder. A minimum of 10.5" of track is required to attach the CellBlok.
This updated version of the CellBlok is new for fall 2020 and features an injection molded construction compared to the original model. The change in material has resulted in a 25% weight reduction and also increased the size of the cable wraps to accommodate the larger wires used in today's fish finders.
SwitchBlade Transducer Arm
The SwitchBlade pairs perfectly with the CellBlok and family of YakAttack fish finder mounts, and is designed to minimize gurgle and resistance, making the SwitchBlade the most efficient transducer arm on the market. The patented arm folds up compactly. No more cumbersome, rigid arm to deal with. The length of the arm is customizable and can easily be cut to length to accommodate nearly any kayak on the market.
Unlike other transducer deployment arms of the past the new SwitchBlade Transducer Arm from YakAttack is focused on speed and adjustability. Featuring a hydrodynamic blade design the SwitchBlade causes less water turbulence resulting in a faster and less noisy over-the-side transducer mounting solution. Even when the SwitchBlade Transducer Arm is mounted on top of the YakAttack CellBlok the overall length reaches deep enough below the hull of your kayak for side imaging transducers to scan as designed. If you don't need the full length of the SwitchBlade simple remove the middle arm and now you have a customized solution. To deploy or retrieve the transducer arm the SwitchBlade features a unique tubular design and multi pivot allowing for easy articulation in and out of the water.
When mounted to the top of the CellBlok the base of the SwitchBlade serves as the mounting platform for any of the YakAttack fish finders mounts. When doing the install simply use the longer t-bolt included in the kit and then you are LockNLoad ready.
This system is compatible with YakAttack MightyMount's, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible.
- Interior Space: 6.375'" long x 4.25'" wide x 2.60'" tall
- Exterior Dimensions: 10.25'" x 6.75'" x 3.50'"
- Weight: 1.4 lbs
- Covered by YakAttack's Built for Life Guarantee
- Can be attached to YakAttack GearTrac and most other kayak track systems
- Popular batteries include the YakAttack/Nocqua 10ah, Dakota Lithium 10ah, and the Amped Outdoors 12ah
- Made from premium materials designed for use in harsh marine environments
- GearTrac, fish finder mount, transducer arm, and display not included.
- Made in the USA